Single Fix Edge Bracket 80mm with Three 6mm DS Fixing Holes – SCB15C
£19.50 (Excluding VAT)
Product Designation :
SCB15C Edge Protection Bracket
Type :
Scaffold Restraint Bracket
Material :
Mild Steel
Finish :
Bright Zinc Plated (thickness 3~5 Microns)
Load Class (TG20) :
Medium to Heavy Duty
Technical Information
A medium to heavy duty scaffold restraint bracket used for punching of scaffolding tubes vertically off of a solid base material. Made from zinc plated mild steel and fitted with a drop forged fitting. It has three holes with a diameter of 6mm and a leg length down the wall of 300mm, designed to spread the load through the base material or across multiple brick courses.
Distance is 90mm from the facing wall to tube face.
Load Data
Please contact us for further information on maximum Tensile Load Data (kN).
Quality Assurance
The drop forged fitting has been manufactured and tested according to BS1139 – EN74. It has been accepted as Class A/B for behaviour under load. The brackets are batch tested and MPI inspected for ultimate performance. The weld strength has been tested in excess of 40kN.
NB – Recommended loads are limited by suitability of base material and structure.
You may also like…
-
Bag (100) Light Section Screw with G16 Washers – DSLS
£7.20 – £20.00 Select options This product has multiple variants. The options may be chosen on the product page -
5/16″ AF Hex Magnetic Nut Driver – SDB516HEX
£5.10 Add to basket -
Bag (100) Heavy Section Drill Screw with G16 Washer – DSHS
£15.00 – £56.00 Select options This product has multiple variants. The options may be chosen on the product page
