Post Support Bracket with locking bolt – SCB17A
£18.50 (Excluding VAT)
Product Designation :
SCB17A Post Support Bracket
Type :
Scaffold Bracket
Material :
Mild Steel
Finish :
Bright Zinc Plated (thickness 3~5 Microns)
Technical Information
The ADI Post Support Bracket has been approved for use for Class A and B Edge Protection in accordance with BS EN 13374:2013+A1:2018
Specifically designed for the installation of temporary edge protection systems, this is a multi-fit bracket with multiple holes – to allow its use in a variety of substrates with a variety of fixings.
Drilled with:
a) Two 12mm holes – one on each side to suit 10mm CS Bolts.
b) Four 6mm holes – one in each corner for DS drill screws.
c) One centre hole 14mm – for single centre anchor fixing.
Load Data
Please contact us for further information on maximum Tensile Load Data (kN).
Quality Assurance
The brackets are batch tested and MPI inspected for ultimate performance. The weld strength has been tested in excess of 40kN.
NB – Recommended loads are limited by suitability of base material and structure.
You may also like…
-
Bag (100) Heavy Section Drill Screw with G16 Washer – DSHS
£15.00 – £56.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bag (100) Light Section Screw with G16 Washers – DSLS
£7.20 – £20.00 Select options This product has multiple variants. The options may be chosen on the product page -
Hex Head Concrete Screw Bolts – CSB
£19.00 – £71.25 Select options This product has multiple variants. The options may be chosen on the product page -
SDS+ Hammer Bit – SDSP
£1.75 – £14.06 Select options This product has multiple variants. The options may be chosen on the product page -
ETA Approved Hex Head Concrete Screw Bolts – CSBCE
£38.00 – £99.00 Select options This product has multiple variants. The options may be chosen on the product page
